Scraps Cards – made by Toni Herron for Twitchit Craft Kits
Christmas Traditional Kit
These cards
are so easy and perfect to use up all the fiddly bits leftover from kits.
Starting off
with plain cardstock to create your usual card base. I used an A4 piece and cut
in half at 5.3/4”. This then folded in half creates the card base at 5.3/4”x4”.
Heavily ink the edges of the card base.
Card topper-
use a larger piece of cardstock from your scraps box. *tip- doesn’t matter what
colour or pattern as it is about to be covered- 5.1/2”x3.3/4”. Stick double sided tape / glue
to fully cover as much as possible. Now using all of your kit scraps, place
each piece randomly to cover the whole topper base. It will look a little like
a mismatch quilt design. Once the whole
base is covered, cut the overhang from the edges. Use some foam tape / 3D dots /
cardboard behind and adhere to the card base. This will give a fun dimensional
element to the card. Place a tag, fussy cut pieces or sentiment to the front of
the card topper to finish off.
6 simple and easy Scrapbooking layouts – made by Toni Herron for Twitchit Craft Kits
Christmas Traditional Kit
This layout is all about layers and a large cluster, using only paper found in the Christmas kit.
*tip- Begin by fussy cutting everything out from your bonus mystery sheets. This makes designing and placing your cluster pieces much easier and quicker later on.
Start by cutting a large circle from your base pattern paper using a circle cutter / electric cutting machine / tracing a plate towards the bottom left side– Ornaments approx. 9” diameter. Flip the circle over, the reverse side will be included in the layered design.
Holiday Floral – cut to fit over the hole 9.1/4”x10”
Woodgrain- is your next layered piece. This sits vertically on the left, about 1” from the side. It is roughly 3” wide and I have torn both long sides.
Place your pattern circle on top of this, roughly in the middle of the 12” layout so it is off centre to the layers. I have included a 5”x7” photo insert. You are able to use whatever size photo suits your needs.
To make the layout pop, use foam tape / 3D dots to raise your cluster elements. I have used fussy cuts from the bonus sheets, stickers from the sticker sheet and tags. *tip- lay all of your pieces before sticking them down. Take a photo with your phone, then use that as a guide to stick all pieces onto your layout. Creating dimension with foam tape as you go.
More simple layouts - 45min to make!
On a white cardstock base, use a plate or circle template, trace around to make a simple wreath design. Then get a bit messy to create a fun background. I used the "sploshing" technique -stamp an ink pad onto a piece of plastic, spritz some water and swirl around so there are no solid lines / edges. Then dip and splosh this onto your cardstock. Let dry or dab up the access with some tissue.
Grab loads of stickers from the sticker sheet included in the kit and place them randomly to creative a long cluster over the wreath lines. *tip- use foam tape / 3D dots to add a dimension element to the page. To finish off the layout I added a 5"x7" photo insert and a title under it.
Layers are what makes these layouts so quick and easy. Without adding anything, we can create several fun and fast layouts using only what is in the kit. Base - Holly Berries 12"x12"
Header & Footer layer - Holiday Floral 3.1/2"x12". Tear at 1" long ways to give two pieces. Place the thinner piece at the top and the larger piece on the bottom. This is act as a pocket for the tags.
Fussy cut out all your tags on the pattern paper and randomly place them along the bottom red paper. Tuck some under and place some on top. Use foam tape / 3D dots to add dimension. I have included a 6"x8" photo insert, however this would look great with either 2 or 3 4"x6" photos side by side.
This was another fun layout that I made using the very last 12"x12" paper in my kit - Wreaths.
I torn a circle hole in the middle and rolled the edges out to make a window design. Using the reverse of the paper, I have the cute wreaths just poking out the back. I added some solid red by sliding in an off cut of Holiday Floral also. I used a 4"x6" photo insert and added my cluster of tags, fussy cuts and stickers on top in the left side, tucked under the main 12"x12" pattern paper. There is still so much more that you can do with this layout. Please feel free to add!!!! *tip- make this design your own by adding a journaling element, title and even some clusters hanging over the outside of the window hole.
Start with adding a white cardstock base for this layout.
Cut a 1" frame all the way around using Festive Florals. From that, cut another square 10"x10". Place this piece on the reverse side in the middle. Create a photo flap, so you can have 3 photos on the layout. On on top and two when flap is lifted. I have used 4.3/4"x6.3/4 photo insert (5x7 trimmed down) however, you can make this flap to suit any size photos you are using.
I used some red ink spray to add some colour and then finished off the layout with a 9.3/4" x 3.1/2" journal mat and embellishment cluster.
I had so much fun creating the background for this layout.
It is super simple, yet very effective!
Grab some ink and blending brush with any stencil and let the creativity flow!
This helps to give the look of an intended pattern paper without having to actually use one.
I did alter the layout sketch just a touch.. Mainly to feature one 5x7 photo instead of two smaller photos.
I intend on using this layout for a special photo this Christmas, so I'm actually ahead with my pages atm which is very rare for us scrappers.. lol..
I added a precut word that I purchased from Scrapbook Fantasies, however you can accomplish this on your own with any die cutting machine.
For embellishments, I added a doily diecut and flowers..
What do you think?
Thank you very much for joining me today and I'm so excited to be able to share with you all the creations for the White With One challenge this month. I appreciate your support throughout the year and wish to thank Jane and the rest of the Design Team for their encouragement and wonderful feedback... Merry Christmas WW1 followers and I look forward to seeing you in the new year!
I really hope that you will drop by the blog and check out the inspiration from the rest of the team members and then get creative to link up your own entry TO OUR FACEBOOK PAGE! Your imagination is your only limit.. Just add a dash of colour to your white layout..
Box with 3 cards– made by Toni Herron for Twitchit Craft Kits
Christmas Traditional Kit
Bottom box –
DK Green / Woodgrain 8.1/4”x10.1/4”.
Score short side at 1”, 2”, 6.1/4” & 7.1/4”.
Score long side at 1”, 2”, 8.1/4” & 9.1/4.
Fold, cut and stick together to create box shape.
Lid- Plain cardstock
8.3/8”x10.3/8” *tip- for perfect fit
over bottom box, add extra 1/8” to the centre measurements. Score one side at a
time at 1” & 2” then rotate and repeat on all 4 sides. This will automatically give you
the extra 1/8” in the centre. Fold, cut and stick together to create box shape.
Card Topper –
Poinsettias 4.1/4”x8.1/4” + Woodgrain 6”x3.3/4”
+ 2 Red/Green 1”x6.1/4”
Score Poinsettia pattern piece at 1” on the two short ends, this will cover the
top and hang over the box ends to decorate those two sides. Add the two Red
pieces to the long sides of the box. I then added a long sentiment strip from
the sticker sheet and used a circle punch to create two half circles for finger
hole grips, making it easier to slide open the box.
Add some double sided foam tape or chipboard under the Woodgrain pattern piece
and still onto the top. Then I added some Gauze and created an embellishment cluster
with the Ute & Tree from the sticker sheet. Plus a tag and sentiment piece from
the bonus mystery sheets. I inked all edges of the top box.
PROJECT TWO-
Start with 3 plain cardstock at 4”x12”
OR regular A4 cut in half. Now fold each into a card base.
1.Woodgrain 5.1/2”x3.3/4” + using scrap piece of Poinsettia – tear on left
side.
Ink around card base and all pieces to be used on card.
Stick patten paper down to make your card topped base.
Add washi tape and fussy cut pieces to create a cluster.
2. Ornaments 5.1/2”x3.3/4” (use B side)
Ink around card base and all pieces to be used on card.
Stick down pattern paper.
Add Gauze and fussy cut pieces to create a cluster
3. Red/Green (cut out a circle) +
Poinsettia off cuts
Using a blending brush, add a distressed ink look to the
base of the card. Then build your topper on to the circle.
Ink around all pieces to be used on card.
Firstly I placed the circle and added the torn pattern pieces behind and added
washi tape to hide any gaps.
Fully adhere all of these before adding fussy cut pieces to create a cluster.
*tip- add foam tape / 3D dots / chipboard to pop the layers.
