Pages

Pages

Thursday, December 10, 2020

Twinchie card, Tag Holder, Flag Garland - Christmas - Twitchit Craft Kits

Twinchie card, Tag Holder, Flag Garland – made by Toni Herron for Twitchit Craft Kits


Christmas Traditional Kit 





PROJECT ONE – Twinchie card
Starting with a plain cardstock 6”x12” - Fold this in half to make a 6”x6” card base.
Distress and Ink around all edges of pieces to be used on this card.
For the first layer of squares, cut all 9 pieces to 1/8” under 2” = 1.7/8”x1.7/8” (use off cut pieces)
Second layer of squares, cut all 6 to 1/8” under first layer – 1.3/4”x1./34”  (use off cut pieces)

Lay them onto your card to create a topper design. Move and rotate pieces until happy with how they are laid out. Stick down the first layer then add some foam tape / 3D dots / cardboard to make the second layer pop to give dimension. Finish off card with some tags and stickers from the sticker sheet in the kit. 





PROJECT TWO – Flag Garland
Bottom layer  RED – 14 Red/Green 1.1/2”x2”
Middle layer GREEN –  14 Red/Green 1.1/4”x1.3/4”
Top layer WHITE WITH STRIPE – 14 Twenty Five Days  1”x1.1/2”
Cut a small 1/2" tail in each flag piece. Do this on ALL layers.


Now stick all layers together making 14 full flag pieces.
Add each letter  from the “MERRY CHRISTMAS” stickers on just a little bit lower from the top edge. This leaves room to poke some holes into each banner on the top sides and threading twine back and forth to create a hanging garland. 






PROJECT THREE- Accordion Tag Holder

Accordion - Festive Florals 6”x10”
Score long side at 2.1/2”,  5” &  7.1/2
Score short side at 4.1/2 – fold this up to make a pocket.

Add a brad onto the far left and right sides to secure the bottom flap up.
Add some washi tape for decoration.
Fill with tags from Christmas Tags pattern paper and fussy cuts from the bonus mystery sheets. 








Visit my on FACEBOOK to keep up to date with my projects in real time 

Scrap Crazy with Toni   

Monday, December 7, 2020

Chocolate Gift Box - Christmas - Twitchit Craft Kits

  Chocolate Gift Box – made by Toni Herron for Twitchit Craft Kits


Christmas Traditional Kit 




Starting with a plain 9.1/2”x12” cardstock
Score the long side at 2.1/2”,  3.3/4”,  6.1/4”,  7.1/2”,  10” &  11.1/4”
Score shorter side at 1”,  2.1/4”,  7.1/4” &  8.1/2”

Fold all score lines and cut as photo below shows. This will all wrap and fold together to create a box.
Stick together the inner box. Remembering there is a flap that will be used to open for a personal message.

Decorating – 2 Red/Green 2.1/2”x1.1/4” and  1.1/4”x 4.7/8” and  2.1/2”x4.7/8”  + 2 Poinsettias 2.1/2”x4.7/8” and 1.1/2”x4.7/8” + 2 Twenty Five Days 1.1/4”x4.7/8” and 2.1/2x4.7/8”




Ink all edges of the project and papers to be used.
Stick down all of the pattern papers.
Add a topper to the front using tags and fussy cuts from the bonus mystery sheets.
Add a magnet to keep the card flap securely closed to the box.
Finish off the box by adding in a special chocolate. This box fits a Marshmallow Santa. 







Visit my on FACEBOOK to keep up to date with my projects in real time 

Scrap Crazy with Toni